2007-09-26 05:46:43 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
there are no truely special tool for replacing it remove the tim around the colomn by taking out 3 t25 screws once you have done that you need a pick or small flat screw diver to remove it from the top on the colomn.
2007-09-26 07:51:06 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Depends on what you have broken and what year the truck is. If you've broken a newer style trucks switch, it is simply a matter or pulling the broken contact out and replacing it. If you've damaged the internal switch or can't get it out on any year of truck, you will need to replace the entire multi-funciton switch in the new ones and the entire signal switch in the older ones. To do either of these requires special tools and knowledge of steering column repair.
2007-09-26 07:19:38 · answer #2 · answered by Deano 7 · 0⤊ 0⤋
What year chevy.
Older ones and most new ones just pull the Steering wheel to gain access to the wire harness.
2007-09-26 05:56:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
it is a discomfort interior the ***. you ought to get rid of th steerage wheel (which you like a puller to do). If it is in basic terms the flasher change, positioned black tape over the tip of the wires and forget approximately it.
2016-12-28 04:03:49 · answer #4 · answered by ? 3 · 0⤊ 0⤋