I purchased a Roper with no coils on the back, so I am assuming that the area is on the bottom, please advise and thanx
2007-09-24 21:38:47 · 8 answers · asked by Marvetta R 1 in Home & Garden ➔ Maintenance & Repairs
Unpulug it and just spray it with water. Don't plug it back until it's dry. The coils are still in the back they are just hidden within the construction of the fridge.
2007-09-24 21:50:09 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Remove the kick panel in the front. Get some tubing from the hardware store to neck down your vacuum hose to a smaller size. That and a long handled brush and your good to go. I taped a brush to a long dowel. Worked great. It takes a bit of work laying on the floor but you can clean it.
2007-09-25 05:08:46 · answer #2 · answered by renpen 7 · 0⤊ 0⤋
it may have small coil there but the one on the back is inside.
compressed air works great.but a wisk broom will do in a pinch.
2007-09-24 21:48:32 · answer #3 · answered by martinmm 7 · 0⤊ 0⤋
You can buy long handled stiff bristled coil brushes that work well
2007-09-28 11:50:55 · answer #4 · answered by James 5 · 0⤊ 0⤋
Yep ! On the bottom and you can usually get to it by removing the front kick panel.
2007-09-25 02:59:00 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Vacuum, soft bristle brush and possibly a small air can, like the type to blow off computer keyboards, but that can be a little dusty, try the first two first.
2007-09-24 21:48:50 · answer #6 · answered by ? 4 · 0⤊ 2⤋
a vacuum cleaner
2007-09-25 03:23:09 · answer #7 · answered by Anonymous · 0⤊ 0⤋
vac.cleaner
2007-09-24 22:31:39 · answer #8 · answered by hari prasad 5 · 0⤊ 0⤋