2007-09-24 00:12:57 · 5 answers · asked by qwerty 1 in Home & Garden ➔ Do It Yourself (DIY)
If you are fairly handy you can try inserting 3/4" plywood in the cavity, and try securing with screws through the metal.
I would suggest that you use a jigsaw to remove the board to allow you to do the necessary work, after finishing , replace the board and secure the appliance to the now strengthened wall.
2007-09-24 00:36:33 · answer #1 · answered by xenon 6 · 0⤊ 0⤋
if i am reading this correctly, you're asking to permanently attach your dryer to the wall? This should not be done, as you need to have spacing for heat buildup, and spacing to connect the dryer hose and power cord, as well as move in case of repair issues.
You can easily attach anything to metal studs, you should use self-tapping screws which will drive directly into the metal.
If you are simply trying to attach a ventilation ducting from the back of the dryer to the wall, then you can buy a simple kit from the hardware store and you will need to cut out a section of drywall and penetrate through the wall to the exterior or up into the attic with more ducting.
Hopefully this helps, or you can give more details on your question.
2007-09-27 14:36:29 · answer #2 · answered by Sho-D 1 · 0⤊ 0⤋
why are you trying to attach the dryer to the wall? all you need to do is run the vent thru the wall, , use a metal elbow to off set the duct,
2007-09-24 01:28:36 · answer #3 · answered by William B 7 · 0⤊ 0⤋
Dryer are not usually attached to the wall, you have to be able to pull them out for repairs one in a while.
2007-09-24 14:43:31 · answer #4 · answered by Lear B 3 · 0⤊ 0⤋
yup, but do you want to move the location a little? you can try removing the studs but are you prepared for all the work that would be involved?
2007-09-24 00:20:43 · answer #5 · answered by sheikhlaodum 3 · 0⤊ 1⤋