2007-09-24 00:00:48 · 11 answers · asked by Neeraj P 1 in Science & Mathematics ➔ Physics
The size of the smallest division on a scale. For the main scale on the common vernier caliper this is probably 0.1 cm. With the vernier scale the least count might be 0.002 cm.
2007-09-24 00:05:25 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The least count of a vernier caliper is the smallest length which can be measured with that instrument. It can be calculated as:
One Main Scale Division / No .of divisions on the vernier
2007-09-24 03:17:54 · answer #2 · answered by Joymash 6 · 0⤊ 0⤋
least count of vernier calliper is
the smallest measure on main scale divided by the no. of divisions on the vernier scale
for example if the smallest division on main scale is 1mm and the no. of divisions on vernier scale is 20 than the least count of vernier calliper will be 1/20 mm = 0.05mm
2007-09-26 00:12:58 · answer #3 · answered by shailesh 2 · 0⤊ 0⤋
Lowest measurement possible with a calipers is the least count.
2007-09-24 00:09:31 · answer #4 · answered by J.SWAMY I ఇ జ స్వామి 7 · 0⤊ 0⤋
Least count is the lowest measurement of vernier callipers.It is 0.01m.
2007-09-26 00:43:27 · answer #5 · answered by Sweetbuz 3 · 0⤊ 0⤋
In the metric system, 0.02 mm. In the Imperial system 0.02". There are more accurate calipers usually found only in the "clean room" or measuring labs. For more precission, a micrometer is typically used.
2016-04-05 22:44:53 · answer #6 · answered by Anonymous · 0⤊ 0⤋
The "Least Count" of any measuring equipment is the smallest quantity that can be measured accurately using that instrument.Thus Least Count indicates the degree of accuracy of measurement that can be achieved by the measuring instrument.vernier caliber has been least count is 0.02mm
2007-09-25 18:25:51 · answer #7 · answered by srini v 1 · 0⤊ 0⤋
The least count is 0.01 mm.
2007-09-24 00:21:59 · answer #8 · answered by Anonymous · 0⤊ 0⤋
VALUE OF 1 MSD/NUM OF VSD=
0.1CM/10=0.01CM
2007-09-25 02:26:54 · answer #9 · answered by Niveshiya 1 · 0⤊ 0⤋
babes its basicaly dependent on the type by which u prepare them
2007-09-24 22:16:29 · answer #10 · answered by Anonymous · 0⤊ 1⤋