What type of oil for Beech worktops?

Question

I ran out of the Oil that the kitchen manufacturer provided. The worktops need oiling, just not sure what type to use. Somebody suggested Linseed oil but I can't stand the smell of it!
Any ideas?

Boris

Answer 1

You can purchase food safe oils and finishes from Rockler.. they have a few different types. At least one dries to a hard finish, and is food safe... (also good to use on wood toys). Another is called a "salad bowl" finish.

Here is the link... you can probably find something similar, if you'd rather purchase locally. Just look for the "food safe" on the package.
http://www.rockler.com/search_results.cfm?filter=food+safe+finish

Have Fun

Answer 2

Beech Block Worktop

Answer 3

Oiling

Hardwood worktops must be thoroughly treated with protective Danish Oil, to all sides,

. An extra three to four coats should also be applied around tapholes, sink cutouts and areas of heavy use or exposure.

Oils are best applied by using a lint-free cloth rather than a brush. A lint-free cloth is any form of material that will not deposit any particles on the wood - an old T-shirt is usually ideal.

When applying the oil yourself, it is best to apply several thin coats rather than one thick application. Always work the oil into the worktop in the direction of the wood grain for best results.

After applying the first coat, you will probably notice that some areas are wet and others dry. This is because the wood will absorb the oil at different degrees in different areas. Wait for 15minutes and then run the cloth over the entire surface again to ensure an even spread. Do not allow large pools of oil to dry on the surface.

Apply the second and third coats in the same manner, allowing ½ hour -1hour for drying time in between coats.

If the surface feels slightly rough in certain areas, or if you wish to develop a smoother surface, then we recommend that you apply a further coat of oil using either a green nylon scouring sponge or wire wool.

Worktops can be finely sanded between coats (120grit - 180grit). However, work surfaces should never be sanded finer than 180grit. To do so will prevent any future applications of oil from penetrating the surface.
Cutting

Answer 4

I just found a site with thousands of downloadable woodworking plans, it s really great. You can check it out here ( woodworkingplans.kyma.info ) Here is an honest review : If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, materials lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and there're step-by-step explainations of how the plan should be done and put together. There are several other sites whose collection of plans have the dimensions totally wrong without any indication of parts lists, material lists or the tools needed. If you're one of those people who have bought plans like this in the past, TedsWoodworking will change your perception. In Ted's Woodworking you will get everything you need: Diagrams which are detailed with a full set of dimensions, step-by-step instructions how to start your project and the necessary materials for that particular project. All the woodworking tools you will need: If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions. Another thing which is so great about these woodworking plans is that there have been some videos included and there are some to guide you in how to build benches home furniture dog houses bird feeders sheds and much much more. There is also a lifetime member acess included in the package and you get these extras for no cost to you as they are free with no additional charges at all! This alone is worth the entire price for TedsWoodworking. Ted Mcgrath is a very dedicated and experienced woodworker who knows what he is talking about when it comes to woodworking and DIY projects s he has been a woodworker for many many years. There is only one drawback that we could find and that being with 16,000 woodworking plans you are bound to get some which look a little disorganized but that is understandable as it is very difficult to place all these plans into their proper categories. Secondly, it might take you a little longer to do the downloads on because of the size of them. But the members area include an option to upgrade to the DVD so you can save time on downloading. I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.Here's the bottom line: If you are planning to start on your woodworking project, this isn't something you SHOULD use, it's something that you would be insane not to. Check the site: ( woodworkingplans.kyma.info )

Answer 5

Buster Block Worktop

Answer 6

Your best bet is Mineral oil, often sold as Butcher Block Oil.The manufacturers lable it that way so you think you are getting somthing special, when its actually just mineral oil. I have been a cabinet maker and woodworker for 24+ years and have used it for wood kitchen tops and cutting boards exclusivly. The truth is most non-pigmented clear wood finishes are safe for food and mouth contact after they are FULLY cured , a good rule of thumb is 30 days. However mineral oil does not need to cure that long. Think about this. How many babies have chewed on thier wooden cribs ? Both of my children did and they have suffered no ill effects and it was stained and finished with a non-pigmented clear finish. But enough of the finishing lesson, sorry. For beech and maple work surfaces mineral oil is you best bet. Its easy to use and dries fairly quickly. A good reapplication every couple of months should keep it looking nice.

Answer 7

Danish oil can be used but a product called "Rustic oil" is best. In the UK it is produced by a supplier called Rustins. Do not use Linseed oil as it will leave a sheen that makes the beech look poor. Linseed is only good for cricket bats and outdoor timber you require a product that soaks into the wood without leaving a surface coat that will nourish the wood not crack its surface.

Answer 8

For the best answers, search on this site https://smarturl.im/aDCkB

use one of the green dish scouring pads and use household cooking oil,this was advised by the company who made and sold me a new sink and wooden chopping/draining board. and no rancid smells from using cooking oil,this would only happen if the worktop was not cleaned properly on regular basis.

Answer 9

type oil beech worktops

Answer 10

Linseed Oil is best,but Tung Oil is very good, though not as moisture proof or long lasting as linseed oil.

The smell subsides after a day or so, it never bothered me any, Boiled Linseed Oil is absolutely the best, most moisture and wear resistant finish.