How to change cabinet color without sanding and stripping?

Question

I just bought 2 oak cabinets. They dont match all my other cabinets. Is there a way to add a top coat of glaze or something to darken them. I need to do this without sanding or stripping. Is it possible?

Answer 1

Try using a darker color of Bartley's Gel Stain. It is so easy to use. You just wipe it on with a cloth with the grain, then let it dry. Sanding between coats is generally not needed. In my area I've only found Bartley's at a local hardware store, so you may have to search around. It is an excellent product, and well worth it. A quart container of the Gel Varnish cost around $20. It is also available in a pint container.

First, if your new cabinets are unfinished you shouldn't need to sand them. If they have a sealer you may have to sand that off before applying the stain.

The site below has a good color selection guide showing how each color stain affects a particular type of wood (pine, oak, etc.) That should make it easier to decide which stain will best match your existing cabinets. Scroll halfway down the page for the Gel Stain section.

Answer 2

Ok, couple of things to think about here.... There are products you can apply as a prep coat to stain, to make make the wood accept the stain more evenly, with less blotchiness, etc... There is also a product called "sanding sealer" which is used to help 'lock the fibers' in place, allowing for a smoother wood finish, with fewer steps. You'd want to apply any stain before the sanding sealer (or in this case, no stain, but before the 'top coat' of polyurethane. Just lightly sand the sealer with some 220grit, or higher sandpaper, before the finish coat) Now... something else to think about... if applying any kind of a finish coat brings out too much contrast in the wood grain... you may want to consider "bleaching" the wood. This will help remove some of the natural pigment in the wood. You can find this type of product in a kit, or 'stand alone', and requires that the 'bleaching chemical' be neutralized before any staining (or finish coating) could be done. I'd recommend that you get some scrap pieces of oak, to experiment with, and try each method, to see what you like the best, visually. Have Fun

Answer 3

Since you state they are OAK; I certainly want to assume they aren't painted.

I do have a suggestion that requires a bit of effort.

Remove a door from each of the different cabinets (1 new and 1 existing)and take them to a decent paint store. At least in that process you'll not only have the comparisons with you; but perhaps have a professional to advise "IN PERSON" as to options to better match the new to the existing.

No offense to Lowes or HD, but I suggest a store specific to paint/finishes. Beyond that a cabinet shop that also does finishing.


Steven Wolf

Answer 4

In the event that you need to discover pleasant thoughts for woodworking I can propose you to check here http://woodworking.toptips.org

It's perfect in the event that you are simply starting out or in case you're a prepared carpenter.
It has thousands and thousands of woodworking arrangements and you have a CAD/DWG software to view and alter the arrangements. You have regulated instructions with photographs and excellent blueprints and schematics. On the off chance that you are a beginner this is the simplest approach to start your woodworking projects, and on the off chance that you already have experience you can at any rate discover a ton of interesting thoughts!

Answer 5

change cabinet color sanding stripping

Answer 6

Want you like to get instant access to over 16,000 woodworking plans?
Check it out https://tr.im/P3tan
Along with stone, mud and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Answer 7

You don't say whether they are stained or painted - if they are stained it will be difficult to get them to match if you apply new stain. However, in either case you can paint over the old surfaces of all of them and have them all look alike. You should use a good primer first, and then add the top-coat.

Answer 8

Ted Mcgrath is a very dedicated and experienced woodworker who knows what he is talking about when it comes to woodworking and DIY projects s he has been a woodworker for many many years


Check the site https://tr.im/pQXBE

Answer 9

accomplished decorative painters could do it..... but i doubt you or i could pull that off.... i think you will just bring more attention to it...