2007-09-21 03:02:09 · 5 answers · asked by Anonymous in Home & Garden ➔ Do It Yourself (DIY)
If you have wood floor level any low spots or seams with fix all.
Using 15 lb. felt (roofing paper) make a exact pattern that fits perfect. You might have to tape some pieces together, for instance make a cut around the door trim and tape it to the larger pattern. Once you have your pattern lay it on the lino and cut. Use proper adhesive & notched trowel. Before putting down adhesive lay lino in place make sure it fits. Then roll 1/2 towards center of room. Apply adhesive,roll lino onto adhesive. Get on side glued down and roll other side toward center until you see existing adhesive. Glue that side and role lino down. Your done. Hope this helps.
2007-09-21 03:37:32 · answer #1 · answered by Anonymous · 0⤊ 0⤋
You really should, at the very least, offer CHIP a thanks for being light hearted.
I see so many questions here realted to LINO and I personally feel it should have gone away like the DINO did.
Pull the toilet; if you have an enclosed vanity cut your sheet stock oversized and at least fine ONE 90 degree angle in the bath if possible and work from there. Trim to fit. Consider removing any cove base to replace for hiding OOOPS, or adding some.
SHEET Vinyl and back out of the room as you apply adhesive and "Unroll" the piece.
Steven Wolf
No offense meant at all, but is LINO truly still such a major product? OR is it perhaps the most readily available regionally in a global sense?
2007-09-21 11:05:28 · answer #2 · answered by DIY Doc 7 · 0⤊ 1⤋
First, I'd buy him a few drinks, and then, I would just ask him nicely. Something like "hey, Lino, wanna get lucky? In the bathroom?"
2007-09-21 10:07:33 · answer #3 · answered by Chip Sweatervest 2 · 1⤊ 2⤋
make sure you have an even subfloor!
2007-09-21 10:10:10 · answer #4 · answered by carla l 1 · 0⤊ 2⤋
www.doityourself.com
2007-09-21 11:11:39 · answer #5 · answered by Sandy B 5 · 0⤊ 0⤋