2007-09-20 06:57:59 · 3 answers · asked by MICHELE R A 1 in Computers & Internet ➔ Hardware ➔ Desktops
Pop the disk drive out of the old tower and install in in the new one as a second drive.
2007-09-20 07:06:34 · answer #1 · answered by Computer Guy 7 · 0⤊ 0⤋
locate the form and producer of your motherboard and examine its compatibility with the particular tower online beforehand attempting this. considering the fact that your capability furnish and fan are component to the motherboard, and inner HD sizes are standards, motherboard compability would desire to be your significant venture. additionally examine to make certain you have sufficient slots for the climate you decide directly to circulate. in case you initiate this technique, first open the unit. Diagram the board and connections to each factor so as which you would be able to rebuid it and comprehend which wires connect the place. beforehand touching something confirm you're grounded, all contraptions are disconnected from capability source and you have suited strategies. do no longer open any capability furnish, fan or video exhibit contraptions. do no longer detach something that is soldered to the motherboard and does not have a properly detaching plug. attempt to pay interest on the the which direction each and every connector is plugged into the board and don't tension a plug if it resists.
2016-12-26 19:56:32 · answer #2 · answered by ? 4 · 0⤊ 0⤋
You can set up a primitive temporary network and enable file sharing between the two.
You can burn your data onto CDs or DVDs and copy that data onto the new computer.
You can remove the hard drive from the old tower and put in inside the new tower as a slave and copy the data from the old hard drive onto the new one.
2007-09-20 07:06:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋