my firewall is preventing my web cam from working?

Answer 1

go into your firewall:
Start> Control Panel > Windows Firewall > change settings

under the exceptions tab find your webcam and put a checkmark next to it.
that should do it.

Answer 2

Go into the firewall preferences. Most firewalls allow you to specify what applications are allowed to access the internet and how... so find your web cam program in the list and allow access.

If you are using McAfee, right-click on the icon in the tray (lower right near the clock), click security center > configure > internet & network > advanced... > program permissions

If the program is on the list and is blocked you can edit the access here... or you can click add program to add the web cam program to the list.

Obviously these instructions will vary depending on what firewall you use but the premise is the same.

good luck.

Answer 3

You don't say what firewall that you are using. There are different ways for each firewall to change the settings so that your web cam will work.

Minddoctor, France

Answer 4

Donot disable you firewall. this would reason a means danger on your pc from the internet. the suited factor is to make certain which port your webcam makes use of, and permit communications on that port on your firewall. You in line with probability able to looking the port your webcam makes use of from the appliance it makes use of. enable the port. yet another decision is while your firewall says that that is obstructing some software which you have faith is your webcam application, enable it. This creates a default rule in the firewall and your webcam would not have extra issues. via the way your messenger might have already got some thoughts to allow webcam get right of entry to. i think of Yahoo supplies the alternative. you are able to examine with that