English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

It's a Kenmore with freezer in the bottom, fairly new. I've tried adjusting the front right tilt screw with no success. Sometimes I can push on the side or open the door and it lessens, other times not. The noise is off when the compressor stops but sounds like it's from the sides. It gets loud and annoying. Thanks for any help.

2007-09-19 07:04:34 · 5 answers · asked by John 4 in Home & Garden Maintenance & Repairs

5 answers

If you are sure the Kenmore Refrigerator/Freezer it is on level, and the vibration continues..Chances are it's a bad compressor or bad compressor support frame.You'll need an Appliance Repairman to fix/repair it. If left untouched the compressor will go bad and then you have an expensive problem. Look into a Sears Warranty. They can be purchased no matter how old the unit is and it covers parts and reapirs for a whole year..Saved me some MAJOR repair costs on mine....

2007-09-19 11:58:25 · answer #1 · answered by JD 7 · 0 0

It's off kilter so you have to level it out. This should work. Had same problem with Armana Fridge freezer on the bottom too. Get a leveller and check it out.

2007-09-19 14:13:33 · answer #2 · answered by Anonymous · 0 0

Make sure it is level and that all four legs are firmly contacting the floor.

Bert

2007-09-19 14:44:36 · answer #3 · answered by Bert C 7 · 0 0

put a small rubber pad under the front leveling jacks, or all of them

2007-09-19 14:10:56 · answer #4 · answered by William B 7 · 0 0

It could be a few different things, but you dont have to guess.
go to http://appliancequickfix.com/BTB.html and find out what to check. It may be something simple.

2007-09-19 21:51:57 · answer #5 · answered by Anonymous · 0 0

fedest.com, questions and answers