English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

Change the oil & filter - 4 qts
Adjust tire PSI
Check brake fluid and add if necessary.
Adjust clutch cable & throttle cables free play.
95% of shops won't check the valve clearances and adjust the valves, unless they're making noise, or the customer requests it (repair cost will be more).
They normaly don't need adjusting that soon, so shops don't bother checking.
Check drive belt tension - rarely needs adjustment.
Lube moving parts (spray with WD-40) foot pegs, side stand, handlebar levers, etc.
Check all lights.
Check battery fluid level.
1/2 - 1 1/2 hrs depending on the amount of work required.
Purchase a shop manual, save your money and do the work yourself.
The shop manual will tell you what to do and how to do it.
http://www.motocom.com/motorcycles/

2007-09-19 08:12:25 · answer #1 · answered by guardrailjim 7 · 0 1

relies upon what form of paintings you had achieved. that is been some years considering the fact that I even have labored on a bike, whether that is particularly useful to to start via examining the coil packs. A coil p.c.. may be getting susceptible or has an intermittent inner short. Run a compression examine on each and every cylinder. in line with probability you have a broken ring or in line with probability a hollow in the appropriate of the piston. make certain that the wonderful warmth variety plugs have been put in. And locate an autonomous keep that makes a speciality of eastern motorcycles. I even have got here upon that the forged motorcycle wrenches paintings independently and function a knack to locate those form of issues. sturdy success.

2016-12-26 18:10:05 · answer #2 · answered by secrist 4 · 0 1

Check out this Forum. Lots of useful info.

http://forums.delphiforums.com/1602/start

2007-09-19 07:05:41 · answer #3 · answered by bigjerry61 4 · 0 1

RTFM

2007-09-19 09:10:34 · answer #4 · answered by 51 6 · 0 1

fedest.com, questions and answers