homemade co2?

Question

How do you make a small nano type co2 system for live aquarium plants. i dont plan on spending 300 dollars on it.

Answer 1

basically the only way i know how is to get a small bottle. like 1 liter soda bottle... cut a very small hole on top.... just enough so you can fit an airline tube in it.

Get yeast mix, and sugar. i believe it is 2 parts sugar and 1 part yeast.

mix it together and then add hot water. The hotness of the water will speed up the reaction causing the co2. Then you get a nano diffusiour which you can find online and attach it.

By doing this, it will usually take around 18-36 hours for it to kick in, The most important part is the hot water.

Answer 2

The most efficient and cost effective way to do this is with a pop bottle and a mixture of sugar, yeast and water. Take an empty 2L bottle and drill a hole in the lid large enough for airline tubing. Use aquarium silicon sealant to make the hole and tubing air tight. Put a check valve in-line so gas can flow out of the bottle, but water can't siphon back in. Next pick what you want for a reactor. You can invert a small container so the gas gathers in that and will slowly diffuse into the water, or you can attach the airline tubing to an air stone so the tiny bubbles created diffuse well into the water. Since the yeast eats the sugar and produces CO2 and EtOH, this is a nice, cheap way of producing CO2 for your plants. You will have to replace the mixture every two weeks, as once the EtOH concentration gets too high the yeast will die and CO2 production will cease. This is the least expensive method I have heard of so far for a do it yourself CO2 injection system.

Answer 3

there are how you will properly make certain CO2 is going into your aquarium. One is to have it located close on your filter out intake, which I do, and yet another is to have in the filter out itself. One 2-liter bottle is sufficient for my 20-gallon. additionally, have the water as on the component to the filter out outflow as attainable to shrink splash and CO2 loss. A medium filter out placing many times works. As for measuring CO2, some people count variety bubbles, the matters with that is that diffusers variety the scale of the bubbles. So, you have 4 bubbles from a diffuser that are small that have much less CO2 than one super bubble from yet another one. I had a actually circulate of bubbles making use of a disposable air diffuser, yet had optimal CO2 ranges. One sturdy way is to diploma your pH. in case you haven't any longer any pH-changing chemical compounds to decrease of develop it, the greater CO2 in the water the decrease the pH. decrease than is a internet site with a calculator and chart for CO2 and corrsponding pH ranges. to apply it right, i choose to propose a CO2 or carbon hardness attempt kit available at maximum autonomous fish shops or online (i've got under no circumstances encountered them at chain shops). it would be $15-20, yet will final a protracted time. the value you get from the attempt is the KH fee choose for suited CO2 length set up one bottle, permit it run to for 3 days(or greater if the bottle is sparkling) and then diploma the CO2. If that is too low, that is particularly useful to to function yet another bottle. whether, in case you do, i choose to propose getting a valve regulator, available the two as a single or in a team/gang ( purely use it the alternative of its training) from Petsmart or different fish keep, to regulate the CO2 as one bottle will possibly no longer be sufficient, yet 2 bottles in line with probability too many. as quickly as you have each and every thing setup purely beware, your plant life might circulate on boom spurt.

Answer 4

This link is great! It discusses the pros and cons of each setup as well as a detailed step-by-step process of assembly and maintenance. http://www.fishlesscycling.com/articles/co2_discussion.html

Soop Nazi

Answer 5

This link shows you how to make your own system: http://www.qsl.net/w2wdx/aquaria/diyco2.html