Clean oil-free iron or steel in a humid area can have a light coating of rust showing by the next day. That is why when they are stored between processing steps they have a coating to keep off that rust.
2007-09-17 13:04:29
·
answer #1
·
answered by Rich Z 7
·
0⤊
0⤋
The rate at which iron will rust is very dependent on lots of factors. The main ones are the relative humidity, the purity of the iron and the cleanliness of the suface. There is (reputedly) an iron monolith in India that is many hundreds of years old that has never rusted; this is because the relative humidity is very low and the iron is very pure. There are claims it was made by an extra-terrestrial life form, but you can believe that or not, as you wish. Most iron contains tramp metals or impurities that can set up galvanic cells and these will promote rusting, so it is best to have pure metal. As far as cleanlines is concerned, if the iron is coated with a protective coating such as oil or grease, it will take longer for the water in the air to get to the iron, so it will not rust very fast. However, if you get a piece of pure iron and thoroughly clean it in a good aqueous wash (preferrably including an acid dip between the wash and final rinse), you will see the surface turn a very pale green in front of your eyes - this is ferrous oxide/hydroxide. Normal rust is brown coloured and is due to the formation of ferric oxide/hydroxide mixture. Rust also needs oxygen to form. Let me suggest an experiment you could do, but it would only be fair if you report your findings on this website. Get four pieces of iron, say some cheap nails, all from the same batch, but make sure they are not galvanized or stainless steel. Thoroughlyly clean them up with some emery paper or other suitable abrasive system. Put them each into different glass jars. Leave one alone, put some tap water into the second, put some boiled tap water into the third (having boiled it for at least five minutes) and put the same boiled water into the fourth, but tip a good layer of mineral oil or melted wax onto the top of the water in the fourth jar. Check them every day and assess the level of "rustiness"; this can be done by their change in colour.
2007-09-17 12:58:38
·
answer #2
·
answered by Anonymous
·
0⤊
1⤋
and of direction the respond is: It varies. the value at which iron will rust is quite based on a lot of components. the main significant ones are the relative humidity, the purity of the iron and the cleanliness of the suface. there is (possible) an iron monolith in India that is many 1000's of years previous that has under no circumstances rusted; that is by using fact the relative humidity is quite low and the iron is quite organic. There are claims it replaced into made via an extra-terrestrial existence form, yet you will have faith that or no longer, as you like. maximum iron includes tramp metals or impurities that would set up galvanic cells and those will sell rusting, so that is suited to have organic metallic. so a methods as cleanlines is in touch, if the iron is roofed with a protecting coating which includes oil or grease, it is going to take longer for the water in the air to get to the iron, so it won't rust very speedy. whether, in case you get slightly organic iron and punctiliously sparkling it in a sturdy aqueous wash (preferrably consisting of an acid dip between the wash and intensely final rinse), you will see the exterior turn a very mild green in front of your eyes - that is ferrous oxide/hydroxide. popular rust is brown colored and is with the help of the formation of ferric oxide/hydroxide mixture. Rust additionally desires oxygen to form. permit me propose an test you would be able to desire to do, whether it would in basic terms be honest in case you rfile your findings in this internet site. Get 4 products of iron, say some decrease priced nails, all from the comparable batch, yet make certain they are actually not galvanized or stainless-metallic. Thoroughlyly sparkling them up with some emery paper or different suited abrasive equipment. placed them each and every into distinctive glass jars. leave one by myself, placed some faucet water into the 2d, placed some boiled faucet water into the third (having boiled it for no less than 5 minutes) and placed the comparable boiled water into the fourth, yet tip a sturdy layer of mineral oil or melted wax onto the appropriate of the water in the fourth jar. examine them daily and examine the point of "rustiness"; that is accomplished via their substitute in coloration. Watch what happens to the metallic and look for something unusual. Now clarify your observations. (regrettably this one does not provide quickest, slowest or elementary)
2016-12-26 15:53:42
·
answer #3
·
answered by ? 4
·
0⤊
0⤋