Ok.
So I got a ring, and it's really expensive, and stuff, so I'm kinda worried about this
But I used to get it on and off by using soap, and water, and now a little bit got under the crystal, and the places with soap under the crystal is turning gray, and it's making it look bad
Is there anyway I can get the soap or the water out from under the crystal?
Oh, if you need a picture, tell me =D
2007-09-17 10:29:47 · 4 answers · asked by Dan Lovely Bones 3 in Home & Garden ➔ Cleaning & Laundry
tooth paste first soak it in vineger then use tooth paste on the back only this should do it
2007-09-17 10:41:35 · answer #1 · answered by narlyknot 4 · 0⤊ 1⤋
Ultra sonic cleaning works extremely well and are actually safe to use with crystal mounts and all crystals. You can buy home use ultra sonic cleaners, however what normally works better is a commercial use cleaner. Most jewelry stores will use an ultrasonic cleaner on your jewelry for a small fee, or you can get your own commercial grade ultrasonic cleaner. I would recommend E-bay of a medical/veterinary supplier for less expensive commercial ultrasonic cleaners. I would not recommend using a acidic solution such as vinegar and water due to the fact that some metals can become etched and appear dulled after acid cleaning.
2007-09-17 17:42:01 · answer #2 · answered by Max J 5 · 0⤊ 1⤋
Several ways:
Toothbrush and toothpaste when you're brushing
Windex and toothbrush
Isopropyl alcohol and toothbrush
soak in amonia and water, toothbrush
2007-09-17 17:42:35 · answer #3 · answered by reynwater 7 · 1⤊ 0⤋
Expensive? It's glass not a diamond.
2007-09-17 19:09:12 · answer #4 · answered by Anonymous · 0⤊ 1⤋