I have a 94 jeep wrangler. I put a 3 1/2 inch suspension lift on it. I lowered the transfer case about an inch. Now I am getting ready to put on shackles that are 1 1/2. will I have problems with my driveline?
2007-09-17 06:19:37 · 4 answers · asked by ff57hotshot 1 in Cars & Transportation ➔ Maintenance & Repairs
Look and see it the drive shafts aligned straight into the front & Rear ends> If not than get weges for the springs for each side they come in degrees To lift the front up to straight>Make sure you don't pull the tail shaft to far out of the trans>
2007-09-17 06:30:12 · answer #1 · answered by 45 auto 7 · 0⤊ 0⤋
You may want to consider a slip yoke eliminator kit for the rear drive shaft. Generally speaking 4" is the max total lift before driveline angles/drive shaft length become an issue.
2007-09-17 06:33:20 · answer #2 · answered by JTECH13 2 · 0⤊ 0⤋
will depend on driveline angles. i would be willing to bet that with the additional 1.5" that you will have concerns. may have to order a longer pair of driveshafts....
we had one here that had a 3 or 4" lift that did lower the tcase and it had a slight vibration by just that.
2007-09-17 06:30:02 · answer #3 · answered by chevy_man_rob 5 · 0⤊ 0⤋
Probably, there are a lot of specialty shops and web sites that deal with Jeeps. Try to find one of them and ask.
2007-09-17 06:26:49 · answer #4 · answered by Lab 7 · 0⤊ 1⤋