Or does it need to be replaced? My chain has two master links from what I can tell (they are the only two that are riveted) and both links are kinked. The 0-ring is also coming out of one of the links.
2007-09-14 09:30:54 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
Never mess with an old or damaged chain. Replace it. Not only can it cause you to get stuck out on the road, if it comes apart while your riding can cause you a serious accident in some cases. Replace it with a good chain and use a riveted master link not the clip type. Have someone that knows what they are doing install it.
2007-09-14 10:42:26 · answer #1 · answered by pappy 5 · 0⤊ 0⤋
Change the chain for a new one.
You should only have one master.
Masters don't kink unless they're bent.
I've never seen an o-ring come out unless the link was broken.
2007-09-14 18:43:45 · answer #2 · answered by Firecracker . 7 · 0⤊ 0⤋
I wound not mess with repairing the chain since the chain drives the wheel. just think about what would happen if the chain came apart when u are going 120 mph. I wouldn't want to be on the bike when that happened
2007-09-14 16:38:50 · answer #3 · answered by brian m 2 · 0⤊ 1⤋
replace chain or get sprocket damage,or spray with wd40 leave over night spray again and work kinks.
2007-09-18 11:56:22 · answer #4 · answered by z900a4 3 · 0⤊ 0⤋
Not safe.
New chain needed.
2007-09-14 16:42:30 · answer #5 · answered by Anonymous · 1⤊ 0⤋
replace with new chain
2007-09-18 13:21:20 · answer #6 · answered by VTR 3 · 0⤊ 0⤋
Replace it. and the sprocket too.
2007-09-17 05:24:02 · answer #7 · answered by austin j 4 · 0⤊ 0⤋
spray it with some staightening oil
2007-09-15 09:57:09 · answer #8 · answered by 51 6 · 0⤊ 2⤋