Hi Can any one tell me the bolt pattern on a 1962 Chev Impala
It has 5 studs so it would 5 x ????
17" x 8 Rim diameter
Thanks
2007-09-14 07:02:24 · 5 answers · asked by John D 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
it's a 4 ¾" bolt circle diameter, if measured from stud across to stud it's about 4½", I usually measure the radius, from center of stud to center of wheel and multiply by 2.
2007-09-14 07:24:59 · answer #1 · answered by ClassicMustang 7 · 1⤊ 0⤋
look at the wheels on the car on then you should have the right figure and then you have the center hole. normaly it is four or five and then you have large bolt small bolt pattern. best way to measure is get a measuring tape go from the outer edge to outer edge of center hole and then measurung from lug bolt to lug bolt. and measure from center hole to one lug bolt.
2016-05-19 05:09:02 · answer #2 · answered by morgan 3 · 0⤊ 0⤋
43/4
2007-09-14 07:06:47 · answer #3 · answered by Anonymous · 1⤊ 0⤋
5 by 4.75
2007-09-16 06:11:01 · answer #4 · answered by Anonymous · 0⤊ 0⤋
5 by 4.75
2007-09-14 10:31:25 · answer #5 · answered by nyninchdick 6 · 1⤊ 0⤋