Do I have to use the bolts on the side to remove the whole shroud thing on top or is there an easier way to get in? Thanks.
2007-09-13 11:19:06 · 6 answers · asked by Alice K 7 in Home & Garden ➔ Maintenance & Repairs
not really an easier way, but when you take the shroud off and replace the pull string, you will be surprised how easy it was. Just make sure not to force anything. all the parts should come off and go back on fairly easily. good luck.
2007-09-13 12:00:48 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Starter Rope Replacement
2016-12-08 15:01:49 · answer #2 · answered by ? 4 · 0⤊ 0⤋
once you pass to interior sight lawnmower shop to get the replace rope, ask they're going to help, and according to probability do it for decrease than you think of. it truly is a sprint complicated once you land up the spring interior the grasp. If this is breaking interior a foot or so from the cope with, purely pass cope with down. eliminate the three or 4 bolts that carry it on and take it with you once you choose for area. I had mine executed at shop for 20 and that secure the rope. sturdy good fortune, I even have on account that employed a gardener !!! ?:)=
2016-11-10 09:02:43 · answer #3 · answered by Anonymous · 0⤊ 0⤋
This is one thing that really should go to a shop! The recoil starter is under spring tension and could be dangerous if not handled correctly when working on this item. The spring must be prewound, the rope inserted, and handle tied in. All while holding the spring back and down. If your hand slips, you could be injured. (cut or possably broken fingers)
Something for someone who is expert at this repair, for sure!
2007-09-13 15:17:15 · answer #4 · answered by Bart S 5 · 0⤊ 1⤋
Make sure that once you install the new rope that you wind it against the spring a couple of turns so that it will retract.
2007-09-13 15:06:33 · answer #5 · answered by renpen 7 · 1⤊ 1⤋
Time to take it to a service center such as Sears.
2007-09-13 11:25:23 · answer #6 · answered by Anonymous · 0⤊ 1⤋