2007-09-12 09:20:51 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
If you have the motor torn down that far you should change it anyway.
2007-09-12 09:34:23 · answer #1 · answered by t. B 5 · 0⤊ 0⤋
if you are referring to the crank bearings, I would go ahead and put a piston kit in the bike if one hasn't been put in it recently... a piston kit typically is not all that expensive in comparison to the labor involved / cost of parts for a bottom end rebuild...
2007-09-12 10:33:07 · answer #2 · answered by pmk 6 · 0⤊ 0⤋
It really all depends , but if its in a shop and they are saying it also needs rings and such , go for it since its already torn down ,it basically boils down to measurement and since I have no idea what shape your bike is in there is no real yes or no answer anyone could give.
2007-09-12 10:53:13 · answer #3 · answered by tommymills919 2 · 0⤊ 0⤋
Uh, it depends on WHAT bearings. Wheel bearings, I'd say no!
2007-09-13 03:39:18 · answer #4 · answered by strech 7 · 0⤊ 0⤋
if you're going to go to the dance, you might as well take a partner. do it once, do it right.
2007-09-12 19:21:59 · answer #5 · answered by nwmech221 2 · 0⤊ 0⤋
no full gasket kit
2007-09-12 13:28:17 · answer #6 · answered by Jeremy T 2 · 0⤊ 0⤋