I tried rotating the bolt "meaning the bolt that holds the crank pully on"counter clock wise and of course the bolt did not budge it just rotated the belt and moved all of the other accessorys so I did not get anywhere with getting the pully off and now my car will not start it just turns over and does not try to start someone said that I might of knocked the car out of time if so how do I get the car back into time? Plz help me my car ran fine untill I tried getting the crank pully off send me some ideas.
Thanks Brandon
2007-09-10 11:32:38 · 5 answers · asked by protasim101 1 in Cars & Transportation ➔ Maintenance & Repairs
The crank pully needed to be replaced because it was bad it started knocking so I have the new one and I was trying to replace it myself well I didn't get very far I didn't even get the bolt loose yet my car will not start now and I don't see what I could of done wrong. And are you sure I cannot mess the timing up buy rotating the crank? It does have the crank angle sensor down there didnt mess with that though. It is just my luck that I try to do something on my own and this has to happen.
2007-09-10 13:20:33 · update #1
The timing is fine. You have unplugged or damaged the crank sensor located behind the crankshaft pulley. Check to see if it is still plugged in or broken. You will see a couple of wires going to it, should be right around the pulley.
2007-09-10 13:50:11 · answer #1 · answered by master auto tech 3 · 0⤊ 0⤋
Do not mess with the crank pulley unless you know what you are doing. Why would you want to change it ? There is no reason for the car to not start just because you rotated the engine.
2007-09-10 12:07:34 · answer #2 · answered by tronary 7 · 0⤊ 0⤋
crank pully not related to no starting...u didnt get it off right....after the bolt comes out u have to pull it off...it has a keyway... even with bolt out it will not throw off timming.it was running fine so y take it apart???hmmm
2007-09-10 11:46:18 · answer #3 · answered by Anonymous · 0⤊ 0⤋
sounds like a difficulty with the valve physique.The valves get varnished and could postpone until temp rises and issues boost.attempt an additive suggested as LUCAS.worked GM for 25 years and did trans for 15.wish this enables.
2016-12-13 05:33:55 · answer #4 · answered by ? 4 · 0⤊ 0⤋
Like the other person said,you didn't throw it out of time it's just one of them cowincidenses,be sure your getting gas and spark.
2007-09-10 11:49:34 · answer #5 · answered by Anonymous · 0⤊ 0⤋