how do i get the choke cable out of the carburater on a 2000 yahama 125 dirt bike?It is a makuni carb?

Answer 1

Ya gotta unscrew the fitting from the Carb Body,,then cable slips out the side of the cholke valve plunger thingie

View assembly #7,,,note the hole in side of lowest item,,just above the pic of sealing ring

That hole is where cable is anchored

http://images.powersportsnetwork.com/fiche/images/Yamaha/2000/Motorcycles/945_carburetor.gif


It's obvious when ya get choke valve unscrewed out carb body

Careful,it's fairly delicate stuff.

Good Luck

Answer 2

Also, make sure there are no openings going to the engine (intake manifold cause carb is removed - stuff a rag in).
The choke plunger easily comes off the cable.
To help prevent this from happening - turn the choke lever to on.