2007-09-09 14:17:06 · 11 answers · asked by john j 1 in Home & Garden ➔ Maintenance & Repairs
roper is a maytag appliance and maytag was bought by whirlpool so you should be able to get the part at any maytag or roper dealer....should be about 25` to 35 dollars including tax...
2007-09-09 16:02:54 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Roper Washing Machine Lid Switch
2016-11-07 08:51:56 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Roper Washer Lid Switch
2016-12-11 12:54:22 · answer #3 · answered by Anonymous · 0⤊ 0⤋
This Site Might Help You.
RE:
How much does a roper washing machine lid switch cost? And can I buy one from Lowes or home depot?
2015-08-07 05:35:10 · answer #4 · answered by Anonymous · 0⤊ 0⤋
On line the whole kit is $28.99 (switch and bracket and wire connectors)
http://www.expertappliance.com/roper-washer-2.html
BTW, looking at that switch it looks like the kind you can get for a couple of bucks at Radio Shack ("microswitch" style) so if you are handy you might want to take it out and bring it to Radioshack to see if you can get one there.
I have never seen Lowe's have parts that specific to an appliance model.
2007-09-09 14:26:54 · answer #5 · answered by Rich Z 7 · 0⤊ 0⤋
Roper is made by Whirlpool. Check with them. What did you do, loose it? The hard part is the hindges. They curve under the top. They don't just lift out. It not a matter of just removing the small screws on each side of the lid.
2007-09-12 02:56:16 · answer #6 · answered by mountainriley 6 · 0⤊ 0⤋
--->> Tips---> https://trimurl.im/f82/how-much-does-a-roper-washing-machine-lid-switch-cost-and-can-i-buy-one-from-lowes-or-home-depot
2015-08-04 14:25:47 · answer #7 · answered by Anonymous · 0⤊ 0⤋
about $10.00 for lid switch.look in the yellow pages for appliance parts&supplys.lowes&home depot won't have that part.
2007-09-09 15:45:27 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Look in your yellow pages for a business that specializes in appliances, parts and repairs. Probably get what you are looking for.
2007-09-09 14:32:20 · answer #9 · answered by William C 7 · 0⤊ 0⤋
if the mach is older, just cut and twist the two wires [striped ends ] together, and tape them, its just a safty switch, Unplug it first
yes u should be able to get a new one, cost around $20,,
2007-09-09 14:33:38 · answer #10 · answered by William B 7 · 0⤊ 0⤋