I need the IP adress of my router please. I have a linksys and I use verizon, ty.
2007-09-07 10:51:16 · 6 answers · asked by Siraco17 1 in Computers & Internet ➔ Computer Networking
Your router has two IP addresses. One is the WAN IP address and the other is the LAN IP address.
To find the LAN IP, click on start -> run -> type in 'cmd' and press enter. On this black screen, type in 'ipconfig' and press enter. Whatever shows up for 'default gateway' is the LAN IP address.
To find the WAN IP, go to http://whatismyip.com . It will tell you what the WAN IP address is.
With a special setup by the ISP, the WAN IP and LAN IP can sometimes be the same, but in most cases, they're different.
Not sure what IP you're looking for, but these instructions will help you to find both of the IP's of the router.
2007-09-07 21:40:22 · answer #1 · answered by GJneedsanswers 5 · 0⤊ 0⤋
On your LAN your router/hub address will most likely be 192.168.1.1 and your PC will be 192.168.0.x.
This address is not the IP address of your router but rather the hub part of the combined router and hub most people use.
You need to logon to your router to find out what IP address Verison has given your WAN port of your router.
Login by using the above IP or by typing www.routerlogin.net in the address bar of your browser. Enter user name "admin" and if you never changed your password then enter "password"
Under basic settings it should show a check box with "Get Ip dynamically from ISP" which is checked.
Underneath that you will see some greyed out addresses showing the WAN (internet) IP address, the subnet mask (should be 255.255.252.0 for most users) and the gateway address.
So to recap the IP address is shown first and your service provider (verison) is shown last.
If you ping these addresses from a command line prompt the routers IP address will have a round trip time of 1ms, the gateway or ISP address will take a bit longer typically 10 ms
2007-09-07 18:23:31 · answer #2 · answered by Colin H 2 · 0⤊ 0⤋
Here's how to find your router's IP address:
1. Click on the Start button.
2. Click Run...
3. In the text box, type in cmd .
4. A black "DOS box" window will pop up. Type into it
ipconfig /all
5. A bunch of seeming gibberish will fill the screen. On the line next to "Default Gateway" your router's IP address should appear.
Good luck.
2007-09-07 18:02:44 · answer #3 · answered by The Phlebob 7 · 1⤊ 0⤋
its probably 192.168.1.1
if your PC is hooked up to it go to Start > Run > type CMD then from the command line type IPCONFIG /ALL and look for the default gateway, thats your router IP
2007-09-07 17:58:28 · answer #4 · answered by Z 6 · 1⤊ 0⤋
Possibly 192.168.1.1. Depends on a number of factors.
2007-09-07 17:58:34 · answer #5 · answered by phirephoto 4 · 1⤊ 0⤋
If you have windows,on run type ipconfig
2007-09-07 18:00:29 · answer #6 · answered by txpyxie 4 · 0⤊ 0⤋