English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I am using parquet adhesive not bitumen, but need to seal the old concrete floor before self levelling, is there a spreadable product I can use?

2007-09-07 02:53:34 · 7 answers · asked by soft69uk 2 in Home & Garden Maintenance & Repairs

7 answers

I used a PVA glue solution (mixed with water) to seal the floor, mind you mine wasn't damp. Look in a DIY superstore, there must be a specific item for this.

2007-09-07 02:58:17 · answer #1 · answered by Anonymous · 0 3

Hi I have done this in a conservatory, check for obvious faults in the finish of the concrete then lay a cushion of felt available from B&Q they also sell a product which has a sticky back with a thin layer of inpact sponge type material which is layed sticky side up this come on a roll. This provides a flat surface and in effect sticks the flooring together stopping any movement with out the use of screws or nails, also provides insulation. Regards John

2016-04-03 08:40:01 · answer #2 · answered by Anonymous · 0 0

Hi
Before you even contemplate laying parquet you should get a moisture reading of the concrete substrate. If you get a high reading then the only affective way to stop the problem is to lay a liquid membrane. (epoxy Resin based products are best) Ball and co make a product called F75 And F76 one is a single application product the other takes 2 applications but is superior to the first. They are quite expensive but they really do work with 100% eefficiency. I am an English heritage carpenter who specialises in parquet and and floor installation. heres the link to their site
http://www.f-ball.co.uk/a4/datash/f75.pdf

2007-09-07 03:06:50 · answer #3 · answered by Anonymous · 1 0

there is a product on the market called synthapruth ..it is a coal product originally marketed by the coal board ..unfortunately it has a very strong smell like cats pee and that puts people off it ..but ..it works well..its a two coat job ..must leave to dry ..can brush it on ..not cheap

2007-09-07 08:56:34 · answer #4 · answered by boy boy 7 · 0 0

any of the concrete locking paints available on the market today would be a good bet to use

2007-09-07 02:58:16 · answer #5 · answered by rich2481 7 · 0 3

Any hardware shop will give you a good concrete sealant to do the job ,just ask.

2007-09-07 02:58:51 · answer #6 · answered by Anonymous · 0 3

I would use, Roofing Compound by Berger. It is a rubber paint used to seal roofs and can be applied by roller or broom.

2007-09-07 03:07:09 · answer #7 · answered by Hansolo 3 · 0 3

fedest.com, questions and answers