I have been looking at new bass boats and it seems that the aluminum ones tend to be less expensive than the fiberglass ones.
For example, a 16 foot aluminum Bass Tracker with a 50 hp 2-stroke mercury was about $13K. While a 16 foot nitro with a 90 hp 2-stroke mercury was about 19K. I have heard that aluminum is lighter and so the HP on the motors can be lower while still giving enough power to get though the water.
What do you think are the advantages/disadvatages of aluminum vs fiberglass for bass boats?
2007-09-06 15:03:57 · 8 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
If you are going for looks, sleek boat, comfort, sharp flake finish, go with fiberglass if you just like "fishing" go with aluminum. Fiberglass will show scratches, dings, not good to scrape over a log trying to get to a tight fishing spot. Plus they are heavier, will take a truck with at least a V6. Aluminum on the other hand is lighter, does not look as good, has less maintenance, can take more abuse than fiberglass. But an aluminum boat is not as wide as a fiberglass boat, that is my biggest complaint. The width makes a big difference, like women's hips !! wider the better !! Look at a 17' boat, world of difference in the 1'.
Good luck & be careful,
2007-09-07 04:32:50 · answer #1 · answered by Anonymous · 1⤊ 0⤋
In general terms, you will get a smoother, quieter & better ride from the fiberglass than the aluminum. The fiberglass is heavier and will ride a little deeper in the water. Obviuosly, the aluminum will bounce off rocks better than the glass, but we usually try to avoid those situations. Also, resale will most likely be better on the good glass boats.
2016-04-03 07:59:18 · answer #2 · answered by ? 4 · 0⤊ 0⤋
In general terms, you will get a smoother, quieter & better ride from the fiberglass than the aluminum. The fiberglass is heavier and will ride a little deeper in the water. Obviuosly, the aluminum will bounce off rocks better than the glass, but we usually try to avoid those situations.
Also, resale will most likely be better on the good glass boats.
2007-09-07 01:41:15 · answer #3 · answered by Anonymous · 1⤊ 0⤋
if you plan to fish in fresh water either one is fine. make sure the aluminum hull is welded construction not riveted. aluminum hulls are noisy when moving about and thats not good in fishing shallow water. for saltwater get fiberglass. a well built aluminum is not always lighter.
2007-09-07 01:34:35 · answer #4 · answered by windybrr 3 · 1⤊ 0⤋
The extra $6K was probably to pay for the extra 40 HP on the outboard. Boating isn't cheap. You want a more expensive hobby?.......start taking flying lessons!.....LOL!
Definition of a boat : "A hole in the water that you pour money into."
2007-09-06 15:17:40 · answer #5 · answered by Anonymous · 0⤊ 0⤋
40 Boat Building Videos - http://BoatPlans.NaturallyGo.com/?zch
2016-04-02 15:01:30 · answer #6 · answered by Janet 3 · 0⤊ 0⤋
I own both alum. & glas. If you'll be fishing around rocks etc. I'd opt for the Aluminum.
2007-09-06 18:02:02 · answer #7 · answered by Buzzy 6 · 1⤊ 0⤋
Noise>
2007-09-07 07:37:23 · answer #8 · answered by 45 auto 7 · 0⤊ 1⤋