ok, i have tile on the wall of my corner shower.....?

Question

i want to replace it but i only want to replace the glass frame, can this be done easily??

Answer 1

With no offense at all, your Q is a bit vague, or confusing, and lacks some detail.

I've installed multiple thousands of sq. ft. of tile, and remodeled more bathrooms than much else, and yet cannot figure out what you mean by "Glass Frame"

Are you talking about Glass Block incorporated into the walls of a corner shower?

Again, and with all due respect "EASY" is relative. Let us know a bit more in some details please.

Steven Wolf

Answer 2

OK-you have tile on the wall of your corner shower? You want to replace the tile?but you only want to replace the glass frame?and are wondering if it is easy?

I would have to suggest you don't touch it

Answer 3

My rule of thumb is whilst a similar difficulty arises a 2nd time, shout "Whoa, whoa, whoa- anybody freeze!". it incredibly is my way of asserting locate out WHAT the challenge IS. do no longer pay a similar clown to return in and canopy up the indicators many times and over. Being stupid (stupid contractor it incredibly is) is the contractor's maximum rewarding employer kind- do no longer motivate them. do no longer attempt to shop something finished already that contributes to the challenge. If I owned the abode right this is what i might do... one million. i might make optimistic i made up my strategies the challenge in the previous doing something (analytic desrtuction may well be mandatory). 2. Rip out each and all of the wall board despite if it isn't the water-resistant style, look at the plumbing and fix it if needed (replumb/resolder, insulate pipes if mandatory, replace contractor's econo-plumbing with high quality aspects), and positioned up the water-resistant hardyboard (concrete backer board) that would have been used in the 1st place and make optimistic that the water-resistant wallboard extends over the fringe of the floor pan, as a substitute of in basic terms assembly it. If the floor pan would not enable this- rip it out and replace with a suited one. make optimistic the drain isn't leaking and wicking in direction of the floor to the wall. look at ceiling under bathe or base of floor pan. 3. Retile with suited mortar and grout. you may stick to the path of the water from the pipes to the drain. No leaks (or moisture like condesation) till it comes out of the bathe head. Water runs down water data wall, falls off drip part onto water data floor that drains appropriate right into a watertight drain, warm and chilly handles are water tight (contained in the wall and out) with sturdy packing... in case you should use a contractor- hire a different one and verify their references. Pay one third to initiate, one third in the midsection, and one third at of entirety- that way they are going to stick around till the tip, and that they gained't ask your self you with how some distance over budget they went. sturdy success.

Answer 4

i think you should re-phrase your question, it makes no sense at all.