How do I refill my Inkjet Catridge?

Question

My Printer is a HP4300 series All-in-one which has catridges 21 (Black) & 22 (Colour)

Answer 1

Peel back the label.

See little holes?

For the 21 inject 11 ml of black into any one of those. For the colour inject 3ml of each colour into the hole which corresponds to the colour.

Replace label exactly as you found it.

Install in printer.

Run a print head cleaning.

Please note that you will no longer have an ink level status monitor as the printer will still think your cartridges are empty.

Answer 2

These cartridges just have normal white sponge in each chamber which you are refilling with ink - that simple.

Black is easy - use the syringe to find the original holes on the top of the cartridges and fill through these. Do not overfill. Do not stick needle in too deep.

Be warned about filling the colour cartridges - HP are sneaky. I actually lift the lid off completely to check which colour chamber is where before I fill them. Just push lid back on and secure with some prestick if necc. pop in machine and use.

Answer 3

The refil kit will contain instructions for how to refil the types of cartridges that the kit covers.

In general you make several holes at the right places and squirt the new ink in... then plug the holes with little rubber plugs or tape.

Answer 4

As I know, Inkjet Catridge can not be refill again. You should buy a new one.

Answer 5

I even have been there and desperate it particularly is a lot much less complicated to take them to be refilled. by the time you freshen up the overspill, your hands and the surfacxe u r making use of, that is in basic terms too a lot problem.

Answer 6

You can get a self-refill kit or take it to one of the outlets who will refill them for you.

Answer 7

There are places that refill them but you are better off just buying new ones.

Answer 8

Go to shpos doing the job, it is better to do so.