It's thick and can be poured, clear with a high gloss shine.
I would like to use it on a countertop. help!
2007-09-04 04:48:19 · 3 answers · asked by ike 2 in Home & Garden ➔ Do It Yourself (DIY)
System Three Resins, Inc. of Auburn, WA has a product for this application called MirrorCoat. It is available from Woodcraft Supply stores.
2007-09-04 04:57:30 · answer #1 · answered by Flyboy 6 · 1⤊ 0⤋
There are a variety of epoxies, each with a different pourability, hardening time, working time, water-resistance, and color. There are also acrylic resins that can be poured and used for embedding memorabilia and novelties into a thick layer.
I have never heard of anyone using it on countertops where stains and resistance to knife cuts are a problem. I have seen it used on bar tables where they make a finish that looks deep as glass and is easy to wipe (but if it gets wrecked they just get another little table).
2007-09-04 04:56:29 · answer #2 · answered by Rich Z 7 · 0⤊ 0⤋
I agree with Rich Z for one very basic reason. IF It's a surface in a kitchen that comes in contact with food products; it shouldn't be used. Certainly one can use a cutting board for food prep, but Epoxys and/or Poly's are not usual substances for counter tops. On a Bar or some such; it's acceptable, and as Rich says there are various formulations; that offer different consistencies and set/cure times. Epoxy might also need a catalyst; like Fiber Glass Resin does.
Another issue will be smell/fumes/possible toxicity/ Lots of ventilation/ and no open flames while working with it or as it sets/cures.
Another reason would be possible damage to the top.
Steven Wolf
2007-09-04 05:13:01 · answer #3 · answered by DIY Doc 7 · 0⤊ 1⤋