English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Specs-

11x11.6
|Bed Stand
|WB-------Desk
|--B--------Desk
|--B--------Dresser
|VENT+W+B-------Door


BEst i could make... but is there anyway to situate the ac through the room? usually my bed covers the vent, but i uncover it.... and I have my fan on high. So what can I do?

2007-09-03 13:42:07 · 3 answers · asked by Anonymous in Home & Garden Maintenance & Repairs

3 answers

I assume that you have floor registers rather than wall or ceiling registers. The most important thing is that the register is not blocked or restricted. If the register is on the floor, it is not ideal because cool air falls and will want to stay near the floor. If it is possible to put a fan near the register and blow it towards the ceiling, you will create a air pattern that will cascade the air over the room.

2007-09-03 13:52:11 · answer #1 · answered by Anonymous · 0 0

If the air comes from a floor grate, place a small powerful fan, (desk-type) just next to the grate, blowing toward the most open space possible. Thrn the fan on high, that should help suck the cold air from the grate and recirculate it. Thats what I do and it works very well.

2007-09-03 21:53:19 · answer #2 · answered by galacticsleigh 4 · 0 0

Move the furniture so the vent is uncovered.
If it's a floor level 'thru-the-wall` unit, put the
bed on blocks so it can blow under.

2007-09-03 20:52:58 · answer #3 · answered by Irv S 7 · 0 0

fedest.com, questions and answers