on the sealcoated driveway. How do I get the fluid spot to disappear? Thanks
2007-09-03 04:39:16 · 6 answers · asked by memories88 1 in Cars & Transportation ➔ Maintenance & Repairs
sprinkle cat litter on it, the litter will absorb it, but you will have to leave it set for a few days, then sweep it up. then you can wash it with hot soapy water and a scrub brush.
2007-09-03 04:44:51 · answer #1 · answered by bob 6 · 1⤊ 0⤋
you might not be able to make it go completely away, the fact that you have a sealcoated driveway will help.sprinkle cat litter on top of the spill, walk over it to crush it in, wait a few hours or a day if you fell ambitious.then rinse with laundry soap and water.
good luck.
2007-09-03 11:53:05 · answer #2 · answered by exnav138 4 · 0⤊ 0⤋
After wiping up all that you can with a rag, Try scrubbing it with powdered laundry soap and a brush after wetting it with water. If that doesn't get it to your satisfaction, try brake cleaner spray. If it discolors or dissolves the sealcoat, you may have to recover that spot with sealcoat again.
2007-09-03 11:47:57 · answer #3 · answered by dathinman8 5 · 0⤊ 0⤋
I used to be a motor head in the late seventies (when everything leaked) and I would use paint thinner, then scrub with a broom, then add liquid dish wash soap to break up the grease for a better rinse (rinse well). If it is excessive use lawn fertilizer to soak up the excess first. Lawn fertilizer is also a good preventative for on going leaks.
2007-09-03 11:50:34 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I assume it is set. Try soapy water and a brush. Before you clean up make sure you know where that fluid came from and that you have a full brake fluid reservoir. I had a leak in my lines that I wasn't aware of, lost my brakes and ran into another car—fortunately at low speed..
2007-09-03 11:46:54 · answer #5 · answered by DrB 7 · 0⤊ 0⤋
Soap and warm water.
Scrub, scrub, scrub.
2007-09-03 11:44:08 · answer #6 · answered by Mr. KnowItAll 7 · 1⤊ 0⤋