2007-08-30 07:32:17 · 7 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Add-ons
Pop the CD in and follow the instructions.. If you were just given the mouse with no instruction book.. Donwload it off the web by using the Labtec site or Google.
2007-08-30 07:37:05 · answer #1 · answered by BigWashSr 7 · 0⤊ 0⤋
You plug the transmitter/receiver into the mouse port. You might have to put new batteries in the mouse. Another thing you will probably have to do is sync them up. There should be a button on the mouse, other than the clicking buttons, and there should be a button on the Transmitter/receiver, press those two at the same time and hold for a few seconds. Once those are sync'd up, then it should work. You also may have to install a driver for it, so hopefully you know how to do that, or the computer may see the new device and install whatever drivers for it that it needs.
2007-08-30 07:40:53 · answer #2 · answered by George P 6 · 0⤊ 0⤋
Assuming that you have all the parts, go to the labtec website and download the drivers for your specific operating system. Follow the instructions for installation and plug in the receiver to your computer. Should be as easy as that. If you have trouble from that point on, ask again and we'll help!
2007-08-30 07:37:16 · answer #3 · answered by Albert L 3 · 1⤊ 0⤋
It should be as simple as making sure there's fresh batteries in the mouse, the dongle (the separate bit that plugs into the back of the computer) is plugged in and can 'see' the mouse - line of sight is always good, and moving the mouse around.
If you didn't use a USB mouse before, it might be that you're running Windows 98 first edition, that doesn't support USB properly.
2007-08-30 07:37:51 · answer #4 · answered by Dragon Dave 2 · 0⤊ 0⤋
go to labtec's website go to drivers and downloads and select the model of your mouse download the driver install it and follow its directions, i went on google and got the drivers page for you:
http://www.labtec.com/index.cfm/gear/splash/AMR/EN,CRID=1
select your type of mouse and download the driver for it
2007-08-30 07:40:59 · answer #5 · answered by im brutall 1 · 0⤊ 0⤋
what are you stupid? read the instruction manual and learn to use www.google.com theres absolutely no reason to ask something like that when theres something called google that brings you to a website with full detailed instructions, drivers, and people who can help you over the phone.
2007-08-30 07:38:46 · answer #6 · answered by Anonymous · 0⤊ 0⤋
read the damn instruction book man!
2007-08-30 07:35:24 · answer #7 · answered by Conspicuously Inconspicuous 2 · 0⤊ 1⤋