it is a hp and I have done everything the manual says to do and it still wont work
2007-08-30 07:23:07 · 7 answers · asked by Dee H 1 in Computers & Internet ➔ Hardware ➔ Printers
Have you used some canned air to blow it out?
2007-08-30 07:26:58 · answer #1 · answered by BigWashSr 7 · 0⤊ 1⤋
I have an hp and this has happen to me. This problem is almost impossible to fix, depending on how much the carriage is jammed. Do you have small printer equipment, like a small screw driver, pliers etc. Try pulling the carriage out with pliers or some other equipment. Try turning your machine on and off to get the jam to move. Try leverage to get the jam out. Good Luck.
2007-08-30 07:37:49 · answer #2 · answered by Leilah099 3 · 0⤊ 0⤋
Sorry to hear that. The office jet is famous for that and your problem is the little plastic gear on the left side of the printer that moves the cartridge harness. I used to save those parts so i woud try a computer store or a printer repair shop. But if it cost more than $50 I would go buy a new printer for $100. gl
2007-08-30 11:31:27 · answer #3 · answered by carm 5 · 0⤊ 0⤋
Call Geek Squad
2007-08-30 07:25:28 · answer #4 · answered by khrome_wind 5 · 1⤊ 1⤋
have you tried opening it up from the back and seeing if you can pull the paper out that way?
2007-08-30 07:27:55 · answer #5 · answered by Anonymous · 0⤊ 0⤋
go to pc world and get it checked...
or buy a new one...
or just chuck out the window if it does your head in
2007-08-30 07:28:58 · answer #6 · answered by amrit_rulz 3 · 1⤊ 0⤋
kool
2007-08-30 07:29:45 · answer #7 · answered by Anonymous · 0⤊ 2⤋