I'm well over 100,000 miles and need to change the plugs. I put it off because I can't even get close to the driver side plug nearest the firewall. The middle plug on the same side is extremely difficult to get to also. What is the procedure to do this?
Any other things to do for a tune up on this beast?
2007-08-30 02:11:31 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Haven't done one myself but some times you can access them better going through the wheel opening---remove the wheel and see if it's easier that way. Parts stores carry shop manuals like Chilton or Haynes or Eautorepair.net has online access for a small fee.
Therangerstation.com is a good site for Explorer/Bronco problems as well.
2007-08-30 02:45:40 · answer #1 · answered by paul h 7 · 0⤊ 0⤋
Your question brought back a flood of memories...cursing and bleeding a little bit I believe.
As a long time shop owner all I can say is...sorry. There is no easy way to access the plugs. Use ratchet knuckles that allow you to better manuever into tight spaces...that's about the only advice I can offer. You can pick up a set at most parts stores for about $10.
The guys at your Ford shop (or any local shop) will be able to do it quicker but they won't do it any differently....they've just been through it so many times they know the exact angles of approach.
I've heard of a few extreme cases that involved the owner unbolting the engine mounts and raising/lowering the entire engine assembly with a jack to gain better access to the plugs. I wouldn't recommend it unless you've got a good deal of experience.
Hope this helps!
2007-08-30 02:31:14 · answer #2 · answered by mrharris32 4 · 0⤊ 0⤋
For pretty basic tasks (like changing your spark plugs) I've found AutoZone's website (www.autozone.com) to be pretty nice. You register your vehicle type, then you can view the repair guide for just about anything that you want to fix. The only real drawback is that if something needs to be replaced in order to get to the part you are replacing, it doesn't tell you that. For detailed information like that, and step-by-step diagrams, Chilton's (www.chiltondiy.com) is still the authority. AutoZone does refer to another site, AllData (www.alldata.com/products/diy/index.html), that seems similar to Chilton's, but I have not used it.
2007-08-30 02:29:01 · answer #3 · answered by Mr. Vicente 1 · 0⤊ 0⤋
Unfortunatly you will have to try and try again... the only other option is to have it done for you at a trusted shop...
2007-08-30 02:15:13 · answer #4 · answered by "/ J()€ 5 · 0⤊ 0⤋