the brake light on the dash is lit, had the dealer run diagnosis, they said the brake switch at the pedal was bad. I changed that and the light is still lit. it comes on when I reach about 37 mph. Is there a sensor on the disc brakes or drive shaft that I need to check. It's a 1994 chev. silverado, 350 ci. with auto trans. full size pick-up?
2007-08-28 16:50:20 · 5 answers · asked by frfiter 3 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
the emergency brake is not on.
if this is a code that has been set, how do I reset the default? I have disconnected the battery and it still comes on at 37 mph.
2007-08-28 18:46:47 · update #1
most likely abs code has set
2007-08-28 16:54:54 · answer #1 · answered by Anonymous · 0⤊ 0⤋
The dealer needs to trace and then repair the sensor and do a reset to the computer--something is wrong and since the brakes are so important--don't fool with it--let the dealer do it and do it right
2007-08-29 02:13:21 · answer #2 · answered by fire_inur_eyes 7 · 0⤊ 0⤋
Check the sender unit... check the brakes and master cylinder.. just tak to local brake shop..not to goodwench, and chevy dealer.
2007-08-28 23:56:08 · answer #3 · answered by ? 7 · 0⤊ 0⤋
Check your emergency brake.
2007-08-29 00:12:30 · answer #4 · answered by (A) 7 · 0⤊ 0⤋
if it has anti lock brakes i would say it is a sensor
2007-08-29 00:01:53 · answer #5 · answered by Dale (aka drc40m) 4 · 0⤊ 0⤋