i need to know what tools i need to remove and replace the cable
its kind of important i get the correct tools i have to take the city bus to the bike shop and then back to the bike. it broke down just tonight ,,,sooooo help please
2007-08-28 14:48:17 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
3/8" drive ratchet
6" extension
12mm socket
To remove the seat and fuel tank.
Needle nose pliars
To remove the fuel line from the tank.
Two 10mm wrenches
To remove the cables from the carburetors.
#2 phillips head screw driver
To open the handle bar switch/throttle housing.
2007-08-28 15:13:31 · answer #1 · answered by guardrailjim 7 · 1⤊ 0⤋
Just go to PEP BOYS and buy a small tool kit for $20-$30. It should be easy once you get the old one off. Just make sure you don't mess with adjustments for the carbs. Have fun and ride safe.
2007-08-28 23:44:47 · answer #2 · answered by ski w 1 · 1⤊ 0⤋
You need some needle nose pliers,metric open end renches plus rachet tools,also some patience doing the job.From ronald
2007-08-29 04:20:27 · answer #3 · answered by ronald_jacobs2000 2 · 1⤊ 0⤋
A 10 MM wrench and a phillips screwdriver.
2007-08-28 21:59:42 · answer #4 · answered by gdwrnch40 6 · 0⤊ 0⤋