I checked walmart but the blades did not look like they fit
2007-08-26 12:57:56 · 16 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Pontiac
You will find that you have to purchase two blades as one blade is 21 inches and the other 24 inches and they require a special clip...........dealers price $105.........auto zone $47
2007-08-26 13:03:44 · answer #1 · answered by stones 3 · 1⤊ 0⤋
2006 Pontiac G6 Wiper Blades
2016-11-04 21:29:20 · answer #2 · answered by ? 4 · 0⤊ 0⤋
This Site Might Help You.
RE:
Where can I buy windshield wiper blades to fit a pontiac G6 it is a 2005.?
I checked walmart but the blades did not look like they fit
2015-08-19 06:46:18 · answer #3 · answered by Winnah 1 · 0⤊ 0⤋
Auto Zone, or O'Riely Autoparts will have what you need. Also Pep Boys or as a last resort you can try your local Pontiac dealership.
2007-08-26 13:01:20 · answer #4 · answered by Anonymous · 1⤊ 0⤋
Auto Zone, Pep Boys, Napa, Western Auto, any auto parts store.
2007-08-26 13:02:40 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Go to Autozone or O'Reilly's AutoParts,..Or measure the length of the blades,,& get same the same length,,There are 2 types now (used to be just one) A standard width & now a narrow width,,most newer cars have the narrow width. Blades at Wal-mart will probably fit if the reference guide says they will.ALSO try to just get a replacement blade REFILL ,,,try to keep your FACTORY blade assembly,,,It is designed for THAT car,,,replacement blade assembleys are not.
2007-08-27 02:49:38 · answer #6 · answered by toysareuskidd 1 · 1⤊ 0⤋
Venus
2007-08-26 13:02:17 · answer #7 · answered by Anonymous · 0⤊ 0⤋
A technician at your local auto parts store can help. If they're free to do so, they usually even install them
2007-08-26 13:01:22 · answer #8 · answered by Anonymous · 0⤊ 0⤋
I go to auto supply stores and they always put them on for me.
Even a Walmart etc. ash the clerks and they will look up the right size and get it for you. Good Luck
2007-08-26 13:04:20 · answer #9 · answered by J. N. 1 · 0⤊ 0⤋
Go to an auto supply store and buy the whole assembly... don't just try and buy the rubber only... most of them will install them for you at no charge... it only takes 2 or three minutes to install..
2007-08-26 13:04:55 · answer #10 · answered by Anonymous · 0⤊ 1⤋