2007-08-26
08:35:05
·
8 answers
·
asked by
ruth p
2
in
Home & Garden
➔ Do It Yourself (DIY)
ok...so the wall isnt obviosly dirty, maybe some finger smudges, its a bedroom so no cooking stains, no smokers stains, just want to know if i can skip this small step. as for why i'm using primer, i have applied compound to the small holes throughout the room, and sanded, and i believe and have read that the primer will produce a smoother paint job. the people who painted before me painted one color over the other, and you can still see the bottom color through the paint, something that would not have been a problem if they had used primer
2007-08-26
09:03:14 ·
update #1
Just prime those spots that you sanded. If you don't, then those spots may shine through (be noticeable from afar). Also prime any dark spots on the walls. Let them dry then paint away. Just make sure you cut in and roll out the wall twice and you should be fine. I have been a professional painter of houses and cars for more than 7 years now. If you have anymore questions I'm more than happy to help. You can IM me or E-mail
2007-08-26 10:35:15
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
I am a professional painter. You do not need to prime the walls before painting unless it is a big color change then you should consider a primer with a stain kill. Here is my best tip for you and everyone. Poll sand the walls and ceiling before you paint. There are usually spider webs etc although not very dirty. It also gets off some uneven surfaces. Oh and I agree areas that were repaired get primed. Without it you can see the difference on your finished walls.
2007-08-26 16:08:14
·
answer #2
·
answered by ab2623 2
·
1⤊
0⤋
No! You can spot prime the spackle you used with the finish paint that you are using. Note that dark colors are difficult to cover with one coat. It may take as many as four coats. If the old color is dark and the new is light, then use a primer tinted close to the new color. If there is any smoke film on the walls, wash with sudsy amonia and water. Smoke films will bleed through all latex paints. I use shalac based primers first if there is any smoke film. If you are not sure, you can spot wash an area, let it dry, and check for a change in color.
2007-08-26 09:36:58
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
With all due respect,,,probably not, but certainly a dusting would help. I am so anti priming in the usual sense after applying thousands of gallons of paint. What cause might you have to suspect you need primer?
Are you painting from dark to light? Semi Gloss to Satin? I'm amazed,,,no offense to anyone, WHY primer is touted so highly, and sold so abundantly, when so often it isn't neccesary.
Any label of any can of any substance will usually say, "Apply to clean/ dry walls,,,at the very least. The issue is obvious as it applies to DRY... what is less obvious to many, is the properties of paint and its base materials.
Define NOT VERY DIRTY first of all. Is it that the walls seem to have yellowed with age/ cooking. or nicotine? Is it that someone chose to create murals with crayon, or is it more,,,finger smudges, dust particles that FLOAT,,, and we breathe by the way,,, or is it more just a desire for a fresher, cleaner look?
If you'd offer the details, I'd be happy to offer more suggestions. BTW you will get many who say the word KILZ or some such, but it may not be a needed EXTRA step, at all.
Steven Wolf
2007-08-26 08:48:58
·
answer #4
·
answered by DIY Doc 7
·
0⤊
0⤋
Just roll it on there girl! Primer will be all that's necessary, no grease to keep paint making a uniform smooth coverage. I agree with the Poster who is "anti primer" per say- I never had occasion to need it and have slathered on gallons of paint and texturized walls and the whole do-it-urself scene. If it is not complete filth, grease, or deep dark hue then just paint! People become like lemmings following every mind programing attempt to get them to buy a product!
2007-08-26 09:09:32
·
answer #5
·
answered by Faerie loue 5
·
0⤊
0⤋
if the wall is painted a light wash with TSP and water won't hurt ,if this is flat paint on the wall just prime it, little tip,tint your primer close to your finish color easier to cover then,for reds prime the wall a dark gray or black first
2007-08-26 08:52:49
·
answer #6
·
answered by cmdogg38 2
·
2⤊
0⤋
you don't need to i painted alot of walls in my days i never wash walls and i never had a problem
2007-08-26 09:40:54
·
answer #7
·
answered by tiger 3
·
0⤊
0⤋
for best results, wash the wall.
2007-08-26 08:46:41
·
answer #8
·
answered by goodcook 4
·
0⤊
0⤋