the edge of a plastic bag melted on a coil that was still warm. Is there anyway I can get it off?
2007-08-26 03:01:33 · 4 answers · asked by Patricia S 3 in Home & Garden ➔ Do It Yourself (DIY)
you'll need a small wire brush, (preferably brass wires, you can get one at the hardware store), turn the burner on low, wait till it heats up and brush
2007-08-26 03:13:25 · answer #1 · answered by phllipe b 5 · 0⤊ 0⤋
The only way turn burner to high it will burn off,make sure the exhaust fan is on leave the immediate area the odor will subside. Unless its a lot of plastic I dont think it will flame up to much but it will give off a lot of fumes.
2007-08-26 03:34:36 · answer #2 · answered by petethen2 4 · 0⤊ 0⤋
On the coil itself, just burn it off. But first cut away as much as possible with scissors. If stuck to bowl, then get cold and slide a knife tip under it. Then heat burner and scrape up goo. I do not recommend sanding.
2007-08-26 03:15:33 · answer #3 · answered by Mike1942f 7 · 0⤊ 0⤋
Gently with sand paper. No sandpaper? Try an emery board ... for finger nails .... Go gently and wipe with damp cloth.
2007-08-26 03:10:57 · answer #4 · answered by eek 6 · 0⤊ 0⤋