2007-08-26 00:10:09 · 9 answers · asked by Anonymous in Cars & Transportation ➔ Boats & Boating
Bleach in a pail for 1hr. Rinse thoroughly with high pressured water. No scrubbing needed.
2007-08-26 04:41:15 · answer #1 · answered by WHO 3 · 0⤊ 1⤋
Try this, go to boat store & get mildew and stain remover, spray it on and watch it dissapear, then rinse off.
2007-08-28 13:57:17 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Don't EVER use bleach on line !!!! It can damage the fibers in the line and weaken it and shorten the life of the line...... Some synthetic lines may tolerate it, but why take a chance??
But the line into a mesh bag and wash it in a washing machine using mild laundry detergent ...
2007-08-26 16:40:37 · answer #3 · answered by cat38skip 6 · 1⤊ 0⤋
briefly soak the lines in a solution of water with 1 tablespoon of bleach per gallon of water. I know this will seem cumbersome so you can also lay the lines out, make the solution, and use a garden sprinkler to administer the treatment. Good luck.
2007-08-26 08:43:47 · answer #4 · answered by dedication62 2 · 0⤊ 1⤋
Place in large garbage can water an bleach or pool chlorine let stand till clean.I do 200' of anchor line every season>>Rinse well.
2007-08-26 01:52:26 · answer #5 · answered by 45 auto 7 · 1⤊ 1⤋
i just removed mildew and green crud from my dock lines by using water and ammonia, you can use bleach also. soak them over night
2007-08-26 00:59:57 · answer #6 · answered by camel 2 · 0⤊ 0⤋
If your mooring lines are in that poor condition and you place any value on you boat I would suggest replacing them.
2007-08-28 16:30:23 · answer #7 · answered by Dennis 3 · 0⤊ 0⤋
I used simple green in a spry bottle, and a heavy brush, then just rinse it off with a hose
2007-08-26 01:05:17 · answer #8 · answered by MR. T. 6 · 0⤊ 0⤋
try primer.
2007-08-26 00:24:00 · answer #9 · answered by Katerina A 2 · 0⤊ 1⤋