2007-08-25 03:33:44 · 4 answers · asked by heavyduty32225 1 in Home & Garden ➔ Do It Yourself (DIY)
when u got ur new motor with four wires, you should have purchased a capacitor that goes with motor. capacitor size to use is written on the motor. u should have two brown wires on new motor. these brown wires connect direct to the new capacitor. The other two wires (black & white) connect to the load side of the contactors. good luck
2007-08-28 15:21:44 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Look at the wiring diagram on both the old and new motor. either the new motor is dual voltage, or hs a way to reverse rotation using the extra wire.
2007-08-25 15:20:44 · answer #2 · answered by john the engineer 3 · 0⤊ 0⤋
Look at the directions. - Maybe the nameplate.
You've got a multi-voltage motor and the wires you use will be determined by the input voltage from your unit.
2007-08-25 11:29:58 · answer #3 · answered by Irv S 7 · 0⤊ 0⤋
There is usually a little diagram on the motor. Sounds like the new one is dual speed or reversable.
2016-05-17 10:50:06 · answer #4 · answered by ? 3 · 0⤊ 0⤋