I did a DTC test on it and its a code 41.Check engine light is always on. From what I know this Car has a GM 3.3L v6 but there is no Camshaft position sensor.. I know the 3800 engines are known to lose their cam magnet. But Does this Engine have a Camshaft position sensor on it with the Magnet on the Cam Sproket?
All I know it was very hard to start and I know it does have Crankshaft position Sensor.
2007-08-24 17:58:07 · 1 answers · asked by James S 6 in Cars & Transportation ➔ Maintenance & Repairs
Look on the back side of the engine between the engine and trans.It is better if you can raise the car.It has one bolt with a 10mm head (10mm socket) and two wires that go to the ign coil pack.Check the wires also they are bad about wearing(chaffing).It's a little tricky to remove,use a 1/4 extension with a universal.
2007-08-25 12:50:30 · answer #1 · answered by wibll1 3 · 0⤊ 0⤋