step to be taken for changing a new toner
2007-08-24 06:14:46 · 4 answers · asked by jones m 1 in Computers & Internet ➔ Hardware ➔ Printers
it depends what kind of printer you have...most you just pull out the old toner and slide the new toner in
2007-08-24 06:22:24 · answer #1 · answered by Julie 6 · 0⤊ 1⤋
By "toner", I guess you mean a laser printer?
Pull over or pop open the cover, and the instruction should be inside, or the toner cartridge would be fairly obvious.
However, each printer can be quite different. While most have a single piece toner / developer assembly, some use a two stage process.
There is no "generic" instructions. We'll need to know the specific model.
If you got the genuine toner, it should even have instructions inside.
2007-08-24 13:19:44 · answer #2 · answered by Kasey C 7 · 0⤊ 0⤋
Printers from offices vary in kinds, models and sizes.
The standard rule is to make sure that you open the door where it is locate inside the printer.
Grab a hold of the front handle of this toner and take it out slowly in a "pendulum" motion towards you.
(They may have rollers or "wings" that are on tracks inside the printer)
Pulled it out in a "lifting motion --not straight towards you!
Grab the new toner and locate the tape or film that covers the
nozzle where the toner comes out from.
If still unsure, see the link below.... I hope it helps!
Put in the new toner in the reverse way that you took out the old one. Good luck and don't get dirty. lol
2007-08-24 13:27:05 · answer #3 · answered by 7 Habits 3 · 0⤊ 0⤋
open door pull out toner cartage
put in new cartage
close door
2007-08-24 15:52:34 · answer #4 · answered by topdn 7 · 0⤊ 0⤋