2007-08-20 04:18:50 · 8 answers · asked by whiteamber3 2 in Home & Garden ➔ Maintenance & Repairs
thanks for all responses, I am back up and running!
2007-08-20 05:19:37 · update #1
Is it getting spark? Im thinking if youve tryed to start it long enough to flood it, its not getting any spark. Try getting a new spark plug first, use a metal paperclip in the sparkplug wire and touch it near a ground( metal) and look for a sharp blue spark . If theres no spark then its either in the wiring harness/ignition switch/ or magneto.
Kidd
2007-08-20 04:55:34 · answer #1 · answered by The Kidd 4 · 0⤊ 0⤋
Remove the spark plug and clean it. Let the mower sit for an hour or so with the spark plug out. Reinstall the plug. Put the throttle to about half and start it up. But, why did it flood in the first place? Did you choke it when it was warmed up? Is the air filter dirty? Don't crank it too long, this will damage the starter. About 3 trys and let is sit to cool the starter.
2007-08-20 11:47:02 · answer #2 · answered by renpen 7 · 0⤊ 0⤋
hahahaha you have to wait for an hour or so then try agian but you shouldent try and try and try to start it if it dosent start in 3 trys cheack the spark plug and make sure its dry and clean if not let it dry out and then use a spark file to clean the gap
2007-08-20 11:27:14 · answer #3 · answered by jason 2 · 0⤊ 0⤋
Take the spark plug out and dry it off.
2007-08-20 11:23:06 · answer #4 · answered by bullcitydon 2 · 0⤊ 0⤋
Pull it out of the water and let it dry out.
2007-08-20 11:31:17 · answer #5 · answered by Jeffrey S 6 · 0⤊ 0⤋
flooded as in too much gas? or as in under water???
2007-08-20 11:31:02 · answer #6 · answered by el88gringo 3 · 0⤊ 0⤋
let it sit for an hour and it will drain itself.
2007-08-20 11:21:57 · answer #7 · answered by Anonymous · 0⤊ 0⤋
PASS TO PLAY POLO-WATER.
2007-08-20 11:25:46 · answer #8 · answered by Mestre 3 · 0⤊ 0⤋