How do I replace the front turning signal lightbulb on a 2003 Chevy Tahoe?

Answer 1

on top of your headlight there is a metal pin, it is L shaped, remove this pin, the headlight will wiggle out, set the headlight on the core support, look down at the turn signal lens, you'll see a release tab, push it lens will come out, with the lens hanging, wiggle headlight back in, now replace your bulb and put lens back in, make sure you hook the lens on the inside first then just push it in, should take less than 5 minutes

Answer 2

There are two metal pins one on both sides of the headlamp assy.Please remove both pins and pull the headlamp assy straight out.You can then reach down to replace the turn signal bulb.When done reinstall the headlamp assy and the holding pins.Hope this helps. Check your owners manual for the correct bulb size.

Answer 3

you might need to remove the headlight to get to it there are a pain also look inside from top and see if you can get your hand in there , twist and turn to remove, hope this helps,