English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2007-08-18 16:09:33 · 8 answers · asked by rhanz 1 in Computers & Internet Computer Networking

8 answers

Turn off PC,
Open case.
Insert card insot spare PCI slot
Close case
Turn PC on, install drivers if supplied/required although most are avail within windows now.

2007-08-18 16:14:25 · answer #1 · answered by stu_the_kilted_scot 7 · 0 0

Lan taking part in cards are undemanding to place in..take your conceal off of your pc and seem for the slots/plugs, the place the lan card suits. Take the steel plug off of the lower back of the pc the place the cardboard will in effective condition. Insert the cardboard and placed the small screw(often provided with the cardboard). be sure the cardboard is down each and each of how into the slot. initiate pc and the eco-friendly easy must be lit, set up the driving force as in step with training. in the journey that your utilising win ninety 8, set up the driving force first then set up the cardboard, otherwise it won't artwork....Have a stable day..steve

2016-12-12 06:16:37 · answer #2 · answered by ? 4 · 0 0

very easy!

First make sure opening the case on your pc will not void and warranty.
If it doesn't, open the case (with the pc unplugged) and make sure you have a spare PCI slot (a small slot ,on the motherboard about 3 inches long toward the bottom back of the pc)
If you do, go to the store (computer store, walmart, etc.) and buy a PCI network adapter (aka LAN card). Open the box and follow the step by step instructions.

2007-08-18 16:18:20 · answer #3 · answered by anthony9820 1 · 0 0

Either buy a pci lan card, open the box and fit it in a spare pci slot and install the software, or buy a usb lan card , load the software first and just plug it in.

2007-08-18 16:13:46 · answer #4 · answered by Anonymous · 0 0

You cannot install anything on the CPU, by LAN card do you mean network card? If so, there should be some white slots on the motherboard, that's where you slot them in.

2007-08-18 16:12:47 · answer #5 · answered by fellnerfx 2 · 1 1

get a usb lan card as the empty pci slot can be used in the future.

mercury of love

2007-08-19 02:45:44 · answer #6 · answered by mercury of love 4 · 0 0

Installing a NIC in your computer is not hard but if you are not sure what you are doing there are somethings that you can mess up. I would recommend asking a buddy or your it department to install the NIC and show you how. Most IT people won't have a problem with this, since is very easy.

2007-08-18 16:16:02 · answer #7 · answered by Ron 1 · 0 0

hi

links are below

good luck

2007-08-18 16:16:57 · answer #8 · answered by steven25t 7 · 0 0

fedest.com, questions and answers