i just need to know how to remove and reinstall the seal. if diagrams alvailable that would be awesome. if not i am pretty good at following directions.
2007-08-18 01:38:08 · 1 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
Manual or automatic. Manual you will loose manual transmission oil. Automatic does not pour out all over the floor. remove the wheel and center axle cotter pin and nut take out strut to steering Knuckle bolts (2) pull outward on the knuckle and hold the axle and wigle it out of the wheel bearing spline shaft clear of the knuckle now pry out the inner CV joint toward the out side of the fender it clicks in with a circular snap ring. Now you see the final drive seal pry it out with a screwdriver. Replace it with a new seal. Warning loose differential bearings can make the new seal leak. Much easier with a Automotive lift. Please place the car on Jack stands. Auto Zone may have one of those how to things on inner axle seal replacement.
2007-08-18 02:00:33 · answer #1 · answered by John Paul 7 · 0⤊ 0⤋