how do I get an iron burn out of carpet?

Answer 1

Unfortuately you can't employ the same techniques used for cleaning carpet stains as you would to repair burns in the carpet. In fact, one can pretty much consider a burn permanant damage. Before you toss your carpet in a dumpster hower, you might try one of these methods to remove carpet stains caused by burns. The first thing you can try is snipping the very top fibers of the carpet. If the burn is too far down in the fibers, you can cut out the burned spot with an exacto knife and cut out another piece exactly the same size and shape from a carpet remnant or hidden area of the carpet. Paint a little glue on the sides of the piece of carpet and glue into place. Hopefully no one will ever notice.
Good Luck! =)

Answer 2

you can't take a burn out of carpet. cut the piece of carpet out and replace with an identical piece of carpet. If that can't be done than cover that area of the carpet with a throw rug.

Answer 3

how can I get a iron burn out of carpet

Answer 4

first remove any scorched fibers remaining with a sharp trimming knife or safety razor blade, to expose the backing beneath. Cut enough matching tufts to fill the hole from a place where it will not show , from under heavy furniture, inside a closet, or a spare piece of carpet. Dab the bottom of the hole and the ends of the tufts with a suitable latex adhesive, then insert the tufts into the hole. Leave to dry, them trim if necessary and brush to blend with the pile

Answer 5

You don't, you buy a new carpet. Or cover the burn with a throw rug or piece of furniture.

Answer 6

Buy a new carpet!

or at least a piece of carpet and properly install it.

Answer 7

Replace that piece of carpet.....

Answer 8

YOU CAN LIGHTEN A LITTLE BY WASHING OVER IT BUT YOU CANT TAKE AWAY THE BURNT CARPET PIECE

Answer 9

You don't. The burn isn't a stain. You can't just remove it.

Answer 10

Attack it with scissors, if that doesn't work, you have to replace it.