i am trading a motorcycle 82 honda v45 for a hobart welder it is a 100percent duty 200 amp welder with 220 outlets and 110 outlets i was wondering what do i need to look for in the welder to make sure i am not getting ripped off i have welded with it with 5/32 rod welded pretty good but i welded on the trailer it was sitting on and the welder didnt have and rubber or wood under it and the coil went bad but the fella says he got a new coil and it works i was wondering if anyone knew what else i needed to look for before i made the trade
2007-08-17 08:05:20 · 1 answers · asked by hoosierdaddy47471 2 in Home & Garden ➔ Do It Yourself (DIY)
Not sure what you mean about the rubber or wood under it. This has nothing to do with the coil on the machine. Unless there is a direct short through it. Go back and try it again. Sounds like a nice machine except burning out the coil.
2007-08-17 10:46:33 · answer #1 · answered by sensible_man 7 · 0⤊ 0⤋