English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

The anti-lock light stays on and so does the brake light continueously(when the car is running). When you hold the brake pedal to the floor and start the car they(the lights) stay off, but as soon as you release the brake pedal there is a clicking sound like a solenoid going off and the lights come back on. I had new brakes(pads front only) installed and new rotors as well, plus bled the brake lines. I thought that would take care of the problem but it didn't and the lights are still on. Any answer's?.

2007-08-16 15:39:07 · 6 answers · asked by Jordan R 1 in Cars & Transportation Maintenance & Repairs

6 answers

Take it back to where they did the work and they should fix it for you o.k.!!!

2007-08-16 15:46:25 · answer #1 · answered by Prechaman 4 · 0 1

on that one you test the fuel pressure by putting a pressure gage on the fuel rail and turning the key on and off a few times to build it up and take a reading off what it says after about three times of doing this,then you can also do a running test of it,id say it may be in need of a fuel pump ,because setting for three years with old gas in it wasn't good for it,even if you drain the old gas and add new to it you may not see much of an improvement in it,good luck on it.

2016-05-20 18:35:19 · answer #2 · answered by ? 3 · 0 0

Yes you have an ABS problem, have the codes pulled because I would say a wheel sensor is either gunked up or failed

2007-08-16 15:46:40 · answer #3 · answered by Christian 7 · 0 0

try cleaning the antilock sensors with brake cleaner the sensor may be covered with brake suit or the sensor(s) are bad

2007-08-19 10:19:47 · answer #4 · answered by jason t 1 · 0 0

your sensor might be messed up or the light could be malfunctioning

2007-08-16 15:48:32 · answer #5 · answered by Tdh460 2 · 0 0

You're screwed. LOL.

2007-08-16 16:28:25 · answer #6 · answered by mrbreeze 2 · 0 0

fedest.com, questions and answers