how do i get my driveshaft off the tranny on a 2000 chevy silverado 1500 4x4, auto trans.
2007-08-16 08:56:04 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Chevrolet
disconnect u joint that holds it to rear end may use pry bar to pry out watch that caps dont pop off houses needle bearings
2007-08-16 10:18:44 · answer #1 · answered by Anonymous · 1⤊ 0⤋
Do what Jim P said. And while you are at Auto Zone buying a new U-joint because you didn't put tape around it, spend the $15 for the Haynes manual. When you get to the point in life where you are removing your own driveshafts, and relying on the advice of others....you should have a book with pictures. A picture is worth a thousand words. (and sometimes well worth the $15)
2007-08-16 23:43:31 · answer #2 · answered by Anonymous · 0⤊ 0⤋
You should have bolts connecting it to the rearend, just get those bolts off and it should slide out of the tranny.
2007-08-16 16:11:58 · answer #3 · answered by Jon 2 · 0⤊ 0⤋
last time I saw this
take one u joint apart and slide spline out of transmission.
2007-08-16 16:07:14 · answer #4 · answered by Bill R 7 · 0⤊ 0⤋
should slide right off
2007-08-16 16:08:04 · answer #5 · answered by Anonymous · 0⤊ 0⤋